Charger

$17.00

NX83 Delta Peak Charger – for your rechargeable RC needs

*Please note, this will not work with the transmitter that comes with the 2014 Nirvana as there is no place to plug it in. We apologize.

SKU: CHARGER
Posted in Electronics, Electronics, Accessories.
Tagged as NX83, rechargeable batteries, Transmitter, trickle charger, spektrum, JST.

NX83 Delta Peak Charger. This is a trickle charger that brings TX and RX cells up to full strength over night, and then continues to hold all batteries at peak strength without fear of overcharging.

For the RC Laser:
One charger lead plugs into either the 5-pack RC Laser rechargeable battery or the battery holder for the receiver. The other lead plugs into the transmitter. Therefore, no batteries need to be handled at all. Lights on the charger indicate that proper connection is made.

For the Nirvana (not 2014 version*), Seawind and most other RC sailboats:
One charger lead plugs into the battery holder for the receiver. The other lead plugs into the transmitter. Therefore, no batteries need to be handled at all. Lights on the charger indicate that proper connection is made.

*We are sorry to say that the 2014 Nirvana transmitter does NOT have a place to plug the charger into.

The lead that plugs into the transmitters has an option for either positive (most transmitters) or negative (Spektrum transmitters). Check to see if your transmitter has a place to plug it in and you are all set!

Check out our recharge kits – great way to get batteries and charger at a special price.
RC Laser 8 (includes 5 pack for boat plus 8 AA for TX)
RC Laser 4 (includes 5 pack for boat plus 4 AA for TX)
Nirvana 8 (includes 8 AA for boat plus 8 AA for TX) – also for Seawind, Fairwind and other RC sailboats
Nirvana 4* (includes 4 AA for boat plus 8 AA for TX) – also for Seawind, Fairwind and other RC sailboats
*2014 Nirvana does NOT have a place to plug the charger into – we apologize.

SailRC is not a warranty service station for any electronics company. We are pretty good at troubleshooting most of our electronics but even we have a hard time keeping up with new technology. We will troubleshoot your issue on the phone and if we cannot resolve your issue, we will send you directly to a manufacturer’s service rep to get a resolution (either repair or replacement). We will NOT be sending you overseas to any manufacturer – all service centers we use are in the US!

Wind Vane

$16.00 $14.00

Very light and sensitive wind vane for the top of the mast.

SKU: WIND
Posted in Miscellaneous, Nirvana, Accessories, RC Laser, Accessories, Explorer, Accessories, Dragon Force, Accessories, Accessories.
Tagged as Nirvana wind vane, RC Laser wind vane, top of mast wind vane, Wind vane.

Very light and sensitive vane, attaches to sail (RC Laser) or Masthead (Nirvana and any other boat).

This masthead vane is painted with florescent yellow on one side and day glow orange on the other to read it better from shore. It is very light weight and has a slick balancing pin in the nose. It is easily installed to the top of the A sail for the RC laser, or directly into the masthead fitting for the Nirvana. Primarily used for light wind racing conditions.

Recommended for Racing.

Boat Stand for the Nirvana

$19.00

To display your Nirvana

Custom-made wooden scissor stand with keel support.

2 left as of July 9, 2013.

Wind Vane

$16.00 $14.00

Very light and sensitive wind vane for the top of the mast.

SKU: WIND
Posted in Miscellaneous, Nirvana, Accessories, RC Laser, Accessories, Explorer, Accessories, Dragon Force, Accessories, Accessories.
Tagged as Nirvana wind vane, RC Laser wind vane, top of mast wind vane, Wind vane.

Very light and sensitive vane, attaches to sail (RC Laser) or Masthead (Nirvana and any other boat).

This masthead vane is painted with florescent yellow on one side and day glow orange on the other to read it better from shore. It is very light weight and has a slick balancing pin in the nose. It is easily installed to the top of the A sail for the RC laser, or directly into the masthead fitting for the Nirvana. Primarily used for light wind racing conditions.

Recommended for Racing.

Sail Numbers for Nirvana Sails

$8.00

Class approved sail numbers for the Nirvana.

 

SKU: NNUM
Posted in Nirvana, Sail/Rigging, Accessories.
Tagged as decal, RC Laser sail numbers, sail numbers decals.

As directed by the Nirvana Racing Rules, the sail number specs are:

  • Height: 3″ tall
  • Font: Arial Rounded MT Bold
  • Color: Black

Each sail number is one piece – i.e. if your sail number is 24, one sticker has 24 on it rather than one sticker with a 2 and one sticker with an 4.

Sail numbers are sold by the pair as each jib sail needs two (to be seen from both sides of the sail).

If you are buying a new boat, each boat receives a hull number of which the last two numbers are your sail numbers. We will provide the 2 digit sail number to the sign maker for your sail numbers.

If you already have a boat, please signify what sail numbers we need to print for you. Sail numbers are 2 digit.

NOTE: Shipping is included in the price for decals.

CD for Race Countdown

$16.00

Two CD set, one 1 minute, One Staggered Start

SKU: START
Posted in Accessories, RC Laser, Accessories, Accessories.
Tagged as race start countdown, race start signal, staggered start CD, Start CD.

Two CD set, one 1 minute, One Staggered Start

Now a set of two CDs (1 minute & staggered start) – Professionally produced – cannon start signal with auto stop.

Our very popular Start Sequence CD has been improved in 2011 with a second CD for handicapping skippers via use of a staggered start system popularly called RYGG*. Both CDs run at the touch of the “Play” button and automatically stop after the race start. They are immediately ready to restart by the press of the “Play” button.

Both professionally recorded CDs feature a very accurate “click” track, and verbal announcement every ten seconds plus a count down of the final 10 seconds. The start signal is a terrific recording of a cannon fire.

RYGG – stands for Red, Yellow, Green, Go. After the 1 minute countdown the announcer says “Red Start, Yellow Start next” and another 10 seconds passes, before a similar statement begins the Green start sequence and then the final start. This allows clubs to use this very easy to use handicapping system to give novice sailors a head start. Each club determines how a skipper qualifies to move up. Our personal club runs races twice a week and we recalculate positions (Red, Yellow, Green) after each day. Our system is available upon request.

The handicap system is run all the time during club races, allowing any new skipper to jump in at any time and be treated fairly by the system. Enjoy this reliable club racing development handicap system, and the standard upper level regatta 1 minute start countdown.

Tiller with Set Screw

$5.00

Fits over the top of the Nirvana rudder to hold it in place and to allow the servo to connect with the rudder.

SKU: NTILLER
Posted in Hull, Nirvana.
Tagged as nirvana tiller, Nirvana tiller with set screw.

Keel with Ballast

$45.00

Keel with ballast for the Nirvana.

SKU: NKEEL
Posted in Nirvana, Hull, Nirvana Showroom.
Tagged as keel with ballast, Nirvana keel.

Let us know your choice in the comment section of the checkout. If we have that color, we will send it. If not, we will send what we have.

It is class legal to paint your hull, rudder and keel.

Includes wing latch, keel fin, ballast and ballast cover assembled.

Hull

$99.00

The Nirvana hull without electronics installed. Fittings are included.

SKU: NHULL
Posted in Nirvana, Hull.
Tagged as Nirvana hull.
Nirvana blue hull with deck decals and fittings but no electronics installed.

Hatch Cover – Hard

$12.00

The hatch cover that helps to make the Nirvana look so realistic.

SKU: NHC
Posted in Hull, Nirvana.
Tagged as hard hatch cover, nirvana hatch cover.

This is the hard cover that fits over the pliable hatch cover.

As of July 9, 2013, we have 2 with decals and 22 without decals.

Sail Set

$25.00

Main and Jib sails

SKU: NSAIL
Posted in Nirvana, Nirvana Showroom, Sail/Rigging.
Tagged as jib sail, main sail, Nirvana main and jib sails, Nirvana sail set, sails.

The only class legal main and jib sails for the Nirvana.

Only 14 left as of July 9, 2013.

Sail Numbers for Nirvana Sails

$8.00

Class approved sail numbers for the Nirvana.

SKU: NNUM
Posted in Nirvana, Sail/Rigging, Accessories.
Tagged as decal, RC Laser sail numbers, sail numbers decals.

As directed by the Nirvana Racing Rules, the sail number specs are:

  • Height: 3″ tall
  • Font: Arial Rounded MT Bold
  • Color: Black

Each sail number is one piece – i.e. if your sail number is 24, one sticker has 24 on it rather than one sticker with a 2 and one sticker with an 4.

Sail numbers are sold by the pair as each jib sail needs two (to be seen from both sides of the sail).

If you are buying a new boat, each boat receives a hull number of which the last two numbers are your sail numbers. We will provide the 2 digit sail number to the sign maker for your sail numbers.

If you already have a boat, please signify what sail numbers we need to print for you. Sail numbers are 2 digit.

NOTE: Shipping is included in the price for decals.

O Ring, Set of 2

$2.00

O-rings help to hold the sheet hook in chosen hole on booms.

SKU: NORING
Posted in Nirvana, Sail/Rigging.
Tagged as Nirvana booms, Nirvana O rings, O ring set, O-ring.
For the booms to hold the sheets in place.

Boom Vang “L” Fitting

$4.00

Boom Vang Mast Pivot (“L” fitting) – At the bottom of the boom vang tackle is a fitting that pivots in the mast tang to which is tied the boom vang line. Does not come with wire keeper.

SKU: NVANGL
Posted in Sail/Rigging.
Tagged as Nirvana Boom Vang L Fitting.

Boom Slider, Round

$2.00

Sliders – Black plastic fittings that fit the Nirvana booms. There are two kinds, “oval” and “round”. The “oval” slider is used to pass the hook completely through. The “round” slider is where the hook hooks into.

SKU: NSLIDERR
Posted in Sail/Rigging.
Tagged as Round boom slider for Nirvana.

Boom Slider, Oval

$2.00

Sliders – Black plastic fittings that fit the Nirvana booms. There are two kinds, “oval” and “round”. The “oval” slider is used to pass the hook completely through. The “round” slider is where the hook hooks into.

SKU: NSLIDERO
Posted in Sail/Rigging.
Tagged as oval shaped boom slider for nirvana.

Battery Holder

$6.00

Perfect generic battery holder. It comes with our RC Laser and fits in the Nirvana and other RC sailboats.

SKU: HOLDER
Posted in Electronics, Electronics, Nirvana, RC Laser.
Tagged as accessories, Battery Holder, electronics, holds batteries on board, nirvana, rc laser, sailing.
Holds 4 AA cells.

Servo, Steering – 311

$11.00

Only class legal steering servo for the RC Laser or upgrade for the Nirvana (class legal for Nirvana as well).

SKU: 311
Posted in Electronics, Electronics, Nirvana, RC Laser.
Tagged as 311, RC Laser servo, RC Laser steering servo.

The Hitec HS-311 Servo.

Steering Servo for the RC Laser and can also be used as an upgrade for the Nirvana Steering Servo.

Servo, Sail – Hitec 645

$39.00

Upgrade for the sail servo on the Nirvana – class legal.

SKU: N645
Posted in Electronics, Nirvana.
Tagged as 645 servo, Nirvana sail servo, sail servo.

Charger

$17.00

NX83 Delta Peak Charger – for your rechargeable RC needs

*Please note, this will not work with the transmitter that comes with the 2014 Nirvana as there is no place to plug it in. We apologize.

SKU: CHARGER
Posted in Electronics, Electronics, Accessories.
Tagged as NX83, rechargeable batteries, Transmitter, trickle charger, spektrum, JST.

NX83 Delta Peak Charger. This is a trickle charger that brings TX and RX cells up to full strength over night, and then continues to hold all batteries at peak strength without fear of overcharging.

For the RC Laser:
One charger lead plugs into either the 5-pack RC Laser rechargeable battery or the battery holder for the receiver. The other lead plugs into the transmitter. Therefore, no batteries need to be handled at all. Lights on the charger indicate that proper connection is made.

For the Nirvana (not 2014 version*), Seawind and most other RC sailboats:
One charger lead plugs into the battery holder for the receiver. The other lead plugs into the transmitter. Therefore, no batteries need to be handled at all. Lights on the charger indicate that proper connection is made.

*We are sorry to say that the 2014 Nirvana transmitter does NOT have a place to plug the charger into.

The lead that plugs into the transmitters has an option for either positive (most transmitters) or negative (Spektrum transmitters). Check to see if your transmitter has a place to plug it in and you are all set!

Check out our recharge kits – great way to get batteries and charger at a special price.
RC Laser 8 (includes 5 pack for boat plus 8 AA for TX)
RC Laser 4 (includes 5 pack for boat plus 4 AA for TX)
Nirvana 8 (includes 8 AA for boat plus 8 AA for TX) – also for Seawind, Fairwind and other RC sailboats
Nirvana 4* (includes 4 AA for boat plus 8 AA for TX) – also for Seawind, Fairwind and other RC sailboats
*2014 Nirvana does NOT have a place to plug the charger into – we apologize.

SailRC is not a warranty service station for any electronics company. We are pretty good at troubleshooting most of our electronics but even we have a hard time keeping up with new technology. We will troubleshoot your issue on the phone and if we cannot resolve your issue, we will send you directly to a manufacturer’s service rep to get a resolution (either repair or replacement). We will NOT be sending you overseas to any manufacturer – all service centers we use are in the US!